JF-307 開布機
點擊圖片放大商品名稱:
規格介紹:
JF-307 開布機
規格介紹:JF-307 開布機
JF-307 Fiber Opener
詳細介紹:
| MODEL | JF-307 | JF-308 |
| 規格 Specification Width | 30" | 40" |
| 主輪錫林Main Cylinder Diameter | 500mm | 650mm |
| 馬力 Power | 15HP、5HP、1HP | 25HP、1HP、5HP |
| 迴轉速Rotation Speed | 1100~1300RPM | 1100~1300RPM |
| 生產力 Output Capacity | 300~500kg/Hr | 300~700kg/Hr |
| 重量 Weight | 1400kg | 1800kg |
| 體積Dimensions (L × W × H) | 3250x1350x1100 mm | 3800x1600x1400 mm |
用途
專用各種化學人造纖維、紗頭、碎布、麻類等再生。
Application / Use
This machine is designed for opening and processing various chemical synthetic fibers, yarn ends, scrap cloth, hemp, etc. into loose fiber form for recycling or further processing in textile or fiber reclaiming operations.
特性
本機器採用特殊U型針布，不損纖維、不起毛球。
Features
Uses a special U-shaped needle cloth that does not damage fibers and prevents pilling.
開纖機平面示意圖說明
1. 正逆開關 Forward/Reverse switch
2. 壓棉輪 300x700 Pressing cotton roller (300 × 700 mm)
3. 羅拉57x1042(短x2)Rollers (short Ø57 × 1042 mm × 2,
羅拉57x1274(長x2) long Ø57 × 1274 mm × 2)
4.U型針布(鐵桶 500x30") U-shaped needle cloth (iron drum 500 × 30″)
5. 風車390x5葉 Fan (390 mm with 5 blades)
6. 主馬達15~20HP Main motor (15–20HP)
7. 風車馬達5HP Fan motor (5HP)
8. 變速馬達1HP(1:30DSCIO) Variable speed motor
9.木簾進料帶 700x4180 Wooden feed conveyor belt
6. 主馬達15~20HP Main motor (15–20HP)
7. 風車馬達5HP Fan motor (5HP)
8. 變速馬達1HP(1:30DSCIO) Variable speed motor
9.木簾進料帶 700x4180 Wooden feed conveyor belt
更多商品
JF-308開布機
MODEL JF-307 JF-308 規格Specification Width 30" 40" 主輪錫林 Main Cylinder Diameter 500m/m 650m/m 馬力 Power 15HP、5HP、1HP 25HP、1HP、5HP 迴轉速 Rotation Speed 1100~1300RPM 1100~1300RPM 生產力 Output Capacity 300~500kg/Hr 300~700kg/Hr 重量Weight 1400kg 1800kg 體積 Dimensions (L × W × H) 3250x1350x1100 mm 3800x1600x1400 mm 用途專用各種化學人造纖維、紗頭、碎布、麻類等再生。 Application / Use This machine is designed for opening and processing various chemical synthetic fibers, yarn ends, scrap cloth, hemp, etc. into loose fiber form for recycling or further processing in textile or fiber reclaiming operations. 特性 本機器採用特殊U型針布，不損纖維、不起毛球。 Features Uses a special U-shaped needle cloth that does not damage fibers and prevents pilling. 開纖機平面示意圖說明 1. 正逆開關Forward/Reverse switch 2. 壓棉輪 300x700 Pressing cotton roller (300 × 700 mm) 3. 羅拉57x1042(短x2)Rollers short Ø57 × 1042 mm × 2 羅拉57x1274(長x2) long Ø57 × 1274 mm × 24.U型針布(鐵桶 500x30") U-shaped needle cloth (iron drum 500 × 30″) 5. 風車390x5葉 Fan (390 mm with 5 blades)6. 主馬達15~20HP Main motor (15–20HP)7. 風車馬達5HP Fan motor (5HP)8. 變速馬達1HP(1:30DSCIO) Variable speed motor9.木簾進料帶 700x4180 Wooden feed conveyor belt (700 × 4180 mm)
JF-408密封式紡棉機
MODEL JF-408-55 JF-408-65 規格 Specification Width 40" 40" 主輪錫林 Main Cylinder Diameter 520mm 650mm 馬力 Power 15HP、5HP、1HP 25HP、5HP、1HP 迴轉速 Rotation Speed 1100~1300RPM 1100~1300RPM 生產力 Output Capacity 300~350kg/Hr 300~450kg/Hr 重量 Weight 1600kg 2000kg 體積 Dimensions (L × W × H) 2150x1600x3950 mm 2220x1600x4150 mm 用途專用各種化學人造纖維、紗頭、碎布、麻類等再生。 Application / Use This machine is designed for recycling various chemical and synthetic fibers, yarn ends, scrap cloth, hemp, etc. by opening and processing them into loose fiber materials for further reuse or reclamation. 特性 本機器採用特殊U型針布，不損纖維、不起毛球。 Features Uses a special U-shaped needle cloth that prevents fiber damage and reduces pilling. 紡棉機平面示意圖說明 1. 彈簧 Spring 2. 齒輪 5Px12T短(組)Short gear set 3. 齒輪 5Px12T長(組)Long gear set4. 齒輪 5Px10T Gear4-1. 羅拉(棉刀) Roller4-2. 棉刀套(培林TAFI284220) Blade sleeve 5. 棉刀座 Blade holder 6. 連齒5/8x15T Chain gear7. 齒輪M4x30T Gear8. 齒輪M4x17T Gear9. 夾棉輪 150x900 Cotton clamp roller 10. 針布打手 530x950(培林UKP211) Needle cloth beater11. 風車 Fan12. 減速馬達1HPx1:60(變頻器)Speed reducer motor13. 風車馬達5HP Fan motor14. 主馬達 15~20HP Fan motor15. 棉箱 Cotton box16. 集塵器 Dust collector ( Cyclon)17. 集塵蓋 Dust collector cover18. 上下光電 Photoelectric sensors (top and bottom)
JF-460 梳棉機
MODEL JF-460 規格Specification 60" 主輪錫林 Main Cylinder Diameter 40"x60" 道夫 Doffer 30"x60" 馬力Power 10HP,2HP,1HPx2 產量 Output Capacity 25~30KG/Hr 重量Weight 4500kg 體積 Dimensions 3080+520x2340x1650 mm 特性耗電量小，操作簡便。單錫林梳棉、經濟型、適合一般不織布產品製造。 例如：棉被、枕頭、軋針棉、熱熔布、麗新布、工程基布、樹脂棉、裡襯廢紗回收...等。 Machine Features Low power consumption and easy operation. Single-cylinder design — economical and suitable for general nonwoven fabric production. Widely used for manufacturing: Quilts Pillows Needle-punched cotton Thermal-bonded fabric Recycled felt (Regenerated fabric) Industrial base fabrics Resin-bonded cotton Recycling of lining waste yarns and fibers Application This machine is designed for waste fiber recycling and regeneration, suitable for processing various fiber materials into nonwoven products or related applications. 廢纖維布回收再生設備
JF-500高速單打手清棉機
MODEL JF-206 容量 Capacity 400-1000kg/hr 馬力Power 1x7.5kw10HP/1x0.37kw1/2HP 重量 Weight 1400kg 體積Machine Size L2200mmxW1050xH2000 mm 特性 本機之特點只按裝一支打手(BEATER)，其直徑為750m/m，由於打手直徑大，棉纖接觸時間長，落棉量亦多，所以除塵效果特別量好。 棉簇經由棉管(LNLET DUCT)，隨著氣流環繞著釘子打手(PEGGED BEATER)向下逆轉，同時也是第一次接觸到塵格，然後被拋直到上方由於有導板(GUIDE PLATE)作用。使棉簇產生螺旋式迴轉，然後又隨氣流向下運轉，此種循環動作連續七次，棉簇經七次開棉和清棉，最後棉簇經出棉管(OUTLET DUCT)飛出機外。 Features This machine is equipped with a single beater (BEATER) with a large diameter of 750 mm, allowing longer contact time with cotton fibers and thereby producing enhanced cleaning and dust removal performance. During operation, cotton clusters pass through the inlet duct and enter a rotating pegged beater, where they are pushed downward against airflow. The fiber clusters then encounter a guide plate that causes them to swirl in a spiral motion and repeatedly circulate. This process of repeated opening and cleaning occurs seven times, after which the cleaned cotton fibers exit through the outlet duct.
JF-505 清花機
MODEL JF-505 JF-507 規格Specification 30" 30" 馬力 Power 7 1/2HP. 1HP 3HP. 7 1/2HP. 1HP 產量Production Capacity 480kg/Hr 530kg/Hr 重量Weight 2800kg 3200kgs 體積Dimensions (LxWxH) 3600x4200x2700 mm 3600x5300x2700 mm 特徵本機用於回收廢料，仆子、斬刀、地弄等多種下腳棉花，乃是一完善鼓風機系統。具備風扇鼓風機，集塵器，抽廢料器，導管及控制板。特為O.E.廠設計，可將材料混合使用 Description This machine is designed for recycling waste materials such as cotton waste from opening, cutting, and floor sweeping. It is a complete blower system equipped with a fan blower, dust collector, waste material suction device, ducts, and a control panel. Specifically engineered for O.E. (Open-End) spinning plants, it allows for the mixing and reuse of materials. 清花機平面示意圖說明 1.進料口 Material Inlet2.打手 Beater (Opening Roller)3.除塵網 Dust Grid 4.主馬達7 1/2HP Main Motor: 7 1/2 HP 5.廢料螺旋桿 Waste Screw Conveyor 6.減速馬達 1HP Gear Motor 7.廢料出料口 Waste Discharge Outlet
JF-601集塵機
MODEL CH-15 CH-30 CH-45 CH-2030 CH-2045 CH-2530 CH-2545 CH-2560 過濾面積 Specification 6.4 12.8 19.2 17.0 25.4 21.2 35.3 42.4 處理風量 A:風速0.6m/secAir Volume (0.6m/s) 230 460 690 610 915 765 1270 1525 Filter Area (m²) B:風速0.8m/secAir Volume (0.8m/s) 305 610 920 815 1215 1015 1690 2030 尺寸 長Length (mm) 1700 3230 4760 3150 4760 3230 4760 6260 寬Width (mm) 2600 2600 2600 3100 3100 3600 3600 3600 高Height (mm) 3000 3000 3000 3410 3410 4200 4200 4200 用途將前段棉屑，用風車吸回集中處理，以保持廠房空氣乾淨流通。 The JF-601 system is designed to suck back cotton waste and dust from the previous processing stages using a fan blower system. It centralizes waste treatment to maintain clean air circulation within the factory plant. 集塵機平面示意圖 1.送風機 15HP 2.吸塵機 5HPx2P 3.LHM-80# 1/4HP 100:1 4.LMH-310 2HP 90:1 5.LH-SH 1/2HP 90:1 Main Components & Power 1.Blower Fan: 15 HP 2.Suction Fan: 5 HP x 2P 3.Gear Motor 1 (LHM-80#): 1/4 HP (Ratio 100:1) 4.Gear Motor 2 (LMH-310): 2 HP (Ratio 90:1) 5.Gear Motor 3 (LH-SH): 1/2 HP (Ratio 90:1)
JF-NO.1 打包機
Model JF-NO.1 油壓缸 Cylinder Size 150x200x1900m/m 馬力Motor Power 15HP x 6P 壓力 Pressure 65000kg/c㎡ 產量Production Capacity 依人員動作決定快慢，每包重量視原料而定 Speed depends on the operator; weight per bale varies according 重量Machine Weight 3500kgs 體積Machine Dimensions (LxWxH) 1750x2300x5000mm 物品加壓體積Compressed Bale Dimensions 1150x650x900mm 特徵 可用以紮包各種纖維，加工者或未加工者均可。 適用於一般製棉或紡織工廠及收集舊衣專用。由作業操作。 Product Description The JF-NO.1 Baling Machine is designed for baling various types of fibers, whether processed or unprocessed. It is widely used in cotton mills, textile factories, and facilities specializing in the collection of second-hand clothing. The machine is manually operated.
JF-NO.2油壓打包機
Model JF-NO.2 油壓缸Cylinder Size 150x200x2500m/m x 2支 馬力Power 30HP 壓力Pressure 130000kg/c㎡ 產量Production Capacity 依人員動作決定快慢，每包重量視原料而定 Speed depends on the operator; weight per bale varies according 重量Machine Weight 8000kgs 可能根據最新設計而有變動May be subject to change based on the latest design. 體積Machine Dimensions (LxWxH) 4000x1400x6000mm 物品加壓體積Compressed Bale Dimensions 1150x650x900mm 特徵 可用以紮包各種纖維，加工者或未加工者均可。 適用於一般製棉或紡織工廠及收集舊衣專用。由作業操作。 Product Description The JF-No.2 Baling Machine is designed for baling various types of fibers, whether processed or unprocessed. It is widely used in cotton mills, textile factories, and facilities specializing in the collection of second-hand clothing. The machine is manually operated.
